BWPPZ - V-81 COMMERCIAL ADHESIVE
- MSDS: BWPPZ
- Manufacturer: MANNINGTON RESILIENCE FLOORS
- Product Name: V-81 COMMERCIAL ADHESIVE
- National Stock Number: 8040-00N057352
Product Identification
Product ID:V-81 COMMERCIAL ADHESIVE
MSDS Date:04/01/1991
FSC:8040
NIIN:00N057352
MSDS Number: BWPPZ
Responsible Party
US
Emergency Phone: 800-232-4832
Info Phone: 609-935-3000
Cage: MANNI
Contractor
Telephone: 609-935-3000
Cage: MANNI
Ingredients
KEROSENE(PETROLEUM), HYDROTREATED; (PETROLEUM DISTILLATE).
CAS: 64742-47-8
RTECS: OA5504000
OSHA PEL N/K
ACGIH TLV: N/K
100 @ 70F. (SARA 313) (CERCLA)
CAS: 67-56-1
RTECS: PC1400000
OSHA PEL 200 PPM, S
ACGIH TLV: 200 PPM; 250 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SOME IRRITATION TO EYES &
SKIN. REPEATED &/PROLONGED CONTACT WITH ADHESIVE MAY CAUSE
DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: FLUSH EYES WITH WARM WATER FOR AT LEAST 15 MINUTES.
CONSULT MD. INHAL: REMOVE TO FRESH AIR. CONSULT MD. SKIN: WASH SKIN
THOROUGHLY WITH WARM SOAPY WATER. INGEST: INDUCE VOMITING. CONSULT
MD.
Fire Fighting
Flash Point Method:PMCC
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:MATL IS CONSIDERED NON-FLAMM, HOWEVER IF MATL IS
INVOLVED IN A FIRE USE MEDIA APPROP FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:CONTAIN W/INERT MATL (SAND OR EARTH) TO
PREVENT FROM ENTERING NATURAL WATER OR SEWAGE SYSTEMS. TRANSFER TO
A SUITABLE CONTAINER FOR PROPER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CLOSE CONTAINERS AFTER USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NORMALLY NEEDED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE ADEQUATE VENTILATION, LOCAL EXHAUST AT POINT OF USE.
Protective Gloves:RUBBER/VINYL GLOVES.
Eye Protection:ANSI APPROVED CHEM SAFETY GOGGLES
Other Protective Equipment:NONE NORMALLY NEEDED.
Work Hygienic Practices:MAINTAIN GOOD SAFE WORK HABITS WHEN WORKNG
W/CHEMICALS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>140F,>60C
Vapor Density:HVR/AIR
Spec Gravity:1.1 (H*2O=)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MISCIBLE
Appearance and Odor:OFF WHITE PASTE WITH MILD PETROLEUM ODOR.
Percent Volatiles by Volume:42
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, FUMES & SMOKE.
Disposal
Waste Disposal Methods:CONTAINERS OF WASTE MATERIAL MUST BE DISPOSED OF
IN COMPLIANCE WITH LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.